Russian Client Completes Factory Test of Its Custom Waste Plastic Pallet Production Line
A Russian recycling company has bought a custom waste plastic pallet production line from ThoYu (Zhengzhou ThoYu Mechanical & Electrical Equipment Co., Ltd.). Before shipment, the customer came to our factory to test the line with their own material. The test is complete and passed. The line now moves to shipment, then installation on the schedule agreed in the contract.
What This Line Runs On
The customer collects two kinds of waste plastic in volume: plastic film, and used pallets. Film is soft, bulky and often dirty; pallets are rigid and dense. That mix is what a waste plastic film pallet machine must handle, so the line treats them separately.
- ✔
Waste film — shredded, then crushed, then dewatered. - ✔
Used pallets — crushed on their own path.
Both are then blended in a ratio the customer specified and fed into the press continuously. The line ran without stopping throughout the trial.
What the Customer Came to Check
Our engineers stayed with the customer through the whole run, from raw scrap to finished pallet. They came with three questions:
Can one line take both film and rigid pallet scrap?
Yes — that was the whole point of the blended feed.
Does the output meet what we agreed before the trial?
It did. Every acceptance condition passed on site.
Can it keep running without stopping to reset?
It ran continuously through the test.
They also walked the line stage by stage, to see how the process works — not just whether the output looked right.
Still weighing your options? Our guide on how to produce pallets from common waste plastics explains which waste grades suit which process.
What Happens Next
This project followed a fixed sequence: agree the process, build the line, then prove it with the customer’s own material before shipping. The test passed, so the line is being prepared for shipment. ThoYu engineers will travel to the site to install and commission it.
The customer’s plan is a local recycling project: put film and pallet scrap that has no good outlet back to work as pallets. We have done this before. In Kuwait, a customer ran a ThoYu plastic recycling line to turn waste plastic into usable raw material on site, rather than ship it out at a loss.
Test Your Own Material Before You Buy
Every waste stream is different. Contamination, resin mix and melt behaviour all change how material presses. So we never quote a waste plastic pallet making machine configuration before running the customer’s own scrap.
Send us a sample. We run it, film the test, and send back the finished pallets with a parameter sheet. You see what your own material can do before you commit.
We do not publish blend ratios or pressing parameters. Those are worked out from your material, for your line.
ThoYu builds, assembles and load-tests its own machines. As a plastic pallet machine manufacturer we supply Russia, the Middle East, Africa, Europe, Southeast Asia and Latin America. Looking for a plastic pallet machine in Russia or across the CIS? See our customer cases.
Post time: Nov-09-2026